LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2007 >> STS Base, 4.6 A, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Power Seat System) >> Repair Instructions >> Seat Horizontal Adjuster Position Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Refer to SIR Caution .
  1. Disable the SIR system. Refer to SIR Disabling and Enabling .
  2. Remove the seat cushion to gain access to the horizontal seat adjuster motor. Refer to Front Seat Cushion Replacement .
  3. Disconnect the electrical connectors from the motor.
    4. Fig 1: View Of Seat Adjuster Drive Cable
    GM792273Courtesy of GENERAL MOTORS CORP.
  4. Remove the seat adjuster drive cable (1) by pulling the cable out of the motor.
  5. Remove the sensor from the motor.
scientia non olet · About LEMON Manuals