LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2007 >> STS Base, 4.6 A, AWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Starter Motor Replacement (LH2) >> Installation Procedure

Installation Procedure

    Fig 1: View Of Starter Motor - LH2
    GM54606Courtesy of GENERAL MOTORS CORP.
  1. Install the starter motor.
    2. NOTE: Refer to Fastener Notice .
  2. Install the starter motor bolts.

    Tighten:  Tighten the bolts to 30 N.m (22 lb ft).

    3. Fig 2: View Of Starter Motor & Connections
    GM1237944Courtesy of GENERAL MOTORS CORP.
  3. Connect the wire (4) and nut to the S terminal on the starter.

    Tighten:  Tighten the nut to 4 N.m (35 lb in).

  4. Connect the battery positive cable (4) and nut to the starter terminal.

    Tighten:  Tighten the nut to 10 N.m (89 lb in).

  5. Install the intake manifold. Refer to Intake Manifold Replacement in Engine Mechanical - 4.6L (LH2).
  6. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
scientia non olet · About LEMON Manuals