LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2007 >> STS Base, 4.6 A, AWD >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Front Drive Axle >> Repair Instructions >> Shield Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Propeller Shaft CV Joint Heat Shield
    GM899068Courtesy of GENERAL MOTORS CORP.
  1. Install the front propeller shaft CV joint heat shield (2) to the vehicle.
  2. Inspect the front propeller shaft CV joint heat shield bolts (1). Replace if damaged or worn.
    3. NOTE: Refer to Fastener Notice .
  3. Install the front propeller shaft CV joint heat shield bolts (1).

    Tighten:  Tighten the front propeller shaft CV joint heat shield bolts to 9 N.m (80 lb in).

  4. Lower the vehicle.
scientia non olet · About LEMON Manuals