Installation Procedure
Courtesy of GENERAL MOTORS CORP.
- Install the windshield wiper and washer switch (1) to the steering column.
Courtesy of GENERAL MOTORS CORP.
- Connect the electrical connectors (1, 3) on the windshield wiper and washer switch.
- Route and connect the electrical connector from the windshield wiper and washer switch.
- Install the wiring harness tie straps.
- Install the steering column trim covers. Refer to Steering Column Trim Covers Replacement
.
- Enable the SIR system. Refer to SIR Disabling and Enabling
.