LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2007 >> SRX 3.6 7, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Object Detection System >> Repair Instructions >> Object Alarm Module Replacement (W/O TB5) >> Installation Procedure

Installation Procedure

Fig 1: View Of RPA Module
GM1210903Courtesy of GENERAL MOTORS CORP.
  1. Install the RPA module to the retainers.
    Fig 2: View Of RPA Module Electrical Connector
    GM1210898Courtesy of GENERAL MOTORS CORP.
  2. Connect the electrical connector (1).
  3. Install the rear body side trim. Refer to Body Side Rear Trim Panel Replacement (w/o TB5) or Body Side Rear Trim Panel Replacement (w/TB5) .
scientia non olet · About LEMON Manuals