LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2007 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 739 (Front Suspension System) >> Repair Instructions >> Spring Jounce Bumper Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2006 GMC Sierra, 2006 GMC Cab & Chassis Sierra, 2006 Chevrolet Silverado, and 2006 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Jounce Bumper To Mounting Cup (4WD 15-Series and 2WD 25/35-Series)
    GM348563Courtesy of GENERAL MOTORS CORP.
  1. Snap the jounce bumper to the mounting cup (4WD 15 Series).
    2. Fig 2: Installing Jounce Bumper (4WD 15-Series and 2WD 25/35-Series)
    GM348561Courtesy of GENERAL MOTORS CORP.
  2. Install the jounce bumper (all 25/35 Series and RWD 15 Series with coil spring).
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the nut to the jounce bumper stud.

    Tighten:  Tighten the nut to 30 N.m (22 lb ft).

  4. Remove the safety stands.
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals