LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2007 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1316 (Steering Linkage) >> Repair Instructions >> Pitman Arm Replacement >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the pitman arm onto the steering gear.
    2. Fig 1: View Of Steering Gear & Pitman Arm
    GM1862648Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  2. Install a new pitman arm washer (2) and nut (1).

    Tighten:  Tighten the nut to 250 N.m (184 lb ft).

  3. Remove the steering gear from the vise.
  4. Install the steering gear. Refer to Steering Gear Replacement (Rack and Pinion) or Steering Gear Replacement (Non-Rack and Pinion) or Steering Gear Replacement (Two Mode Hybrid) .
  5. Adjust the front toe. Refer to Front Toe Adjustment .
scientia non olet · About LEMON Manuals