LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2007 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1267 (Power Steering System) >> Repair Instructions >> Steering Gear Boot Replacement - On Vehicle >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the steering linkage outer tie rod. Refer to Steering Linkage Outer Tie Rod Replacement .
    2. Fig 1: View Of Inner Tie Rod Assembly & Hex Jam Nut
    GM1759516Courtesy of GENERAL MOTORS CORP.
  2. Remove the steering linkage inner tie rod nut (2) from the steering linkage inner tie rod (1).
    3. Fig 2: View Of Steering Gear Boot Clamp & Boot
    GM1759500Courtesy of GENERAL MOTORS CORP.
  3. Remove the steering gear boot clamp (2) from the steering gear boot (1).
    4. Fig 3: Identifying Steering Gear Boot Clamp & Boot
    GM1759493Courtesy of GENERAL MOTORS CORP.
  4. Remove the steering gear boot clamp (1) from the steering gear boot (2) with side cutters.
  5. Discard the steering gear boot clamp (1).
  6. Remove the steering gear boot from the steering gear.
scientia non olet · About LEMON Manuals