LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2007 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1239 (Battery, Charging System And Starting System) >> Repair Instructions >> Generator Bracket Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Engine Wiring Harness, Clip, Bolt & Connector
    GM1696914Courtesy of GENERAL MOTORS CORP.
  1. Remove the generator. Refer to Generator Replacement .
  2. Remove the power steering pump. Refer to Power Steering Pump Replacement (4.8L, 5.3L, 6.0L, and 6.2L) .
  3. Remove the engine wiring harness clip bolt (3) are reposition the clip (1) away from the generator bracket.
    4. Fig 2: View Of Generator Bracket & Bolts
    GM847280Courtesy of GENERAL MOTORS CORP.
  4. Remove the generator bracket bolts.
  5. Remove the generator bracket.
scientia non olet · About LEMON Manuals