LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2007 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1239 (Battery, Charging System And Starting System) >> Repair Instructions >> Engine Ground Strap Replacement >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Engine Ground Strap & Bolt
    GM1702850Courtesy of GENERAL MOTORS CORP.
  1. Install the ground strap to the vehicle.
  2. Install the ground strap terminal to the stud.
    3. NOTE: Refer to Fastener Notice .
  3. Install the engine ground strap nut at the front plenum panel.

    Tighten:  Tighten the nut to 9 N.m (80 lb in).

  4. Position the ground strap to the rear of the left cylinder head.

    Tighten:  Tighten the bolt to 16 N.m (12 lb ft).

  5. Install the engine ground strap bolt to the rear of the left cylinder head.
  6. Install the upper intake manifold sight shield. Refer to Upper Intake Manifold Sight Shield Replacement .
scientia non olet · About LEMON Manuals