Digital Radio Receiver Replacement

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Digital Radio Receiver Replacement

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the right instrument panel insulator. Refer to Instrument Panel Insulator Replacement (with RPO SLT) or Instrument Panel Insulator Replacement (without RPO SLT) .
1	Digital Radio Receiver Tip: Disconnect the electrical connectors. Push in on the 2 tabs and pull down to remove the receiver. Perform the Digital Radio Receiver Setup. Refer to Digital Radio Receiver Setup .