LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2007 >> Escalade EXT >> Repair and Diagnosis >> Electrical >> Horns >> Horn System >> Diagnostic Information and Procedures >> DTC B2750 >> Circuit/System Testing

Circuit/System Testing

  1. Ignition OFF, disconnect the C4 harness connector at the underhood fuse block.
  2. Connect a test lamp between the harness connector terminal G1 and battery voltage.
  3. Command the horn ON and OFF with a scan tool. The test lamp should turn ON and OFF when changing between the commanded states.
    • If the test lamp is always OFF, test the horn relay control circuit for a short to voltage or an open/high resistance. If the circuit tests normal, replace the BCM.
    • If the test lamp is always ON, test the horn relay control circuit for a short to ground. If the circuit tests normal, replace the BCM.
  4. If all circuits/connectors test normal, replace the underhood fuse block.
scientia non olet · About LEMON Manuals