Power Lift Gate Motor Replacement

Fig 1: View Of Liftgate Close Actuator Motor & Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the body side trim panel. Refer to Trim Panel Replacement - Rear Quarter - Left (Extended Wheelbase w/E61) or Trim Panel Replacement - Rear Quarter - Left (Extended Wheelbase w/o E61) or Trim Panel Replacement - Rear Quarter - Left (Standard Wheelbase w/E61) or Trim Panel Replacement - Rear Quarter - Left (Standard Wheelbase w/o E61) . Remove the liftgate actuator rod. Refer to Lift Gate Actuator Rod Replacement .
1	Power Liftgate Actuator Motor Bolts (Qty: 2) NOTE: Refer to Fastener Notice . Tighten: 8 N.m (71 lb in)
2	Power Liftgate Actuator Motor Tip: Disconnect the electrical connector. Reprogram the power liftgate motor replacement. Refer to Lift Gate Control Module Programming and Setup .

Callout

Component Name

Preliminary Procedures

Power Liftgate Actuator Motor Bolts (Qty: 2)

NOTE: Refer to Fastener Notice .

Tighten: 8 N.m (71 lb in)

Power Liftgate Actuator Motor
Tip:

Disconnect the electrical connector.
Reprogram the power liftgate motor replacement. Refer to Lift Gate Control Module Programming and Setup .