LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2007 >> Escalade EXT >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Diagnostic Information and Procedures >> Cruise Control Switch Indicator Inoperative >> Circuit/System Testing

Circuit/System Testing

  1. Ignition OFF, disconnect the cruise control switch assembly.
  2. Connect a fused jumper between the voltage signal circuit and the low reference circuit.
  3. Ignition ON, observe the Cruise On/Off Switch parameter.
    • If the Cruise On/Off Switch parameter displays ON, replace the cruise control switch assembly.
    • If the Cruise On/Off Switch parameter displays Off, test the voltage signal circuit and the low reference circuit for an open, or for a high resistance.
    • If all circuits test normal, replace the BCM.
scientia non olet · About LEMON Manuals