Scan Tool Data List
Body Control Module
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Operating Conditions: Ignition ON, with the engine OFF. Transmission shift lever in the PARK position. | |||
| Brake Applied Output Signal | Data/ Outputs | ON/ OFF | OFF |
| Shift Lock Solenoid Command | Data/ Outputs | ON/ OFF | ON |
| Shifter Unlock Command | Data/ Outputs | ON/ OFF | OFF |
Engine Control Module (ECM)
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Operating Conditions: Ignition ON, with the engine OFF. Transmission shift lever in the PARK position. | |||
| Ignition Voltage | Auto Transmission Data | Volts | 0-25v |
| IMS A/B/C/P | Auto Transmission Data | Park, Park/Reverse, Reverse, Reverse/Neutral, Neutral, Neutral/Drive 4, Drive 4, Drive 4/Drive 3, Drive 3, Drive 3/Drive 2, Drive 2, Drive 2/Drive 1, Drive 1, Invalid, Open | Park |
| Reverse Inhibit Solenoid Circuit Status | Auto Transmission Data | OK, Incomplete, Short B+, Short Gnd/ Open | OK |
| Reverse Inhibit Solenoid Command | Auto Transmission Data | Not Equipped/ ON/ OFF | ON |
| TCC Brake Switch | Auto Transmission Data | ON/OFF | OFF |