LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2007 >> CTS V >> Repair and Diagnosis >> External Pages >> Different car >> Section 187 (Supplemental Inflatable Restraint System) >> Repair Instructions >> Inflatable Restraint Side Impact Module Wiring Harness Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Refer to SIR Inflator Module Handling and Storage Caution .
    CAUTION: Refer to SIR Caution .
  1. Disable the SIR system. Refer to SIR Disabling and Enabling .
  2. Partially remove the seat back panel to access the wiring.
    3. Fig 1: View Of Inflatable Restraint Side Impact Inflator Module Wiring Harness, Inflator Module & Seat
    GM513378Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Removal of the right or the left inflatable restraint side impact module wiring harness uses the same procedure.
  3. Remove the inflatable restraint side impact module (2) from the seat (1). Refer to Inflatable Restraint Side Impact Module Replacement - Front .

    With the seat back panel removed, the inflatable restraint side impact module wiring harness (3) will be exposed.

  4. Remove the retaining clips that fasten the side impact module wiring harness (3) to the seat (1).
scientia non olet · About LEMON Manuals