LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2007 >> CTS V >> Repair and Diagnosis >> Electrical >> Body Electrical >> Wiring Systems And Power Management - Introduction >> Repair Instructions >> Ignition Lock Cylinder Case Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Ignition Lock Cylinder Case Assembly & Screws
    GM664260Courtesy of GENERAL MOTORS CORP.
  1. Align the ignition lock cylinder case assembly (1) with the steering column tilt head assembly.
    2. NOTE: Refer to Fastener Notice .
  2. Secure the ignition lock cylinder case assembly (1) to the steering column using 3 pan head tapping screws (2).

    Tighten:  Tighten the screws to 7 N.m (62 lb in).

  3. Install the ignition switch assembly. Refer to Ignition and Start Switch Replacement .
  4. Install the ignition lock cylinder. Refer to Ignition Lock Cylinder Replacement .
  5. Install the theft deterrent control module. Refer to THEFT DETERRENT MODULE REPLACEMENT .
  6. Install the turn signal cancel cam and upper bearing. Refer to Turn Signal Cancel Cam and Upper Bearing Inner Race Replacement .
  7. Enable the SIR system. Refer to SIR Disabling and Enabling .
scientia non olet · About LEMON Manuals