LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2007 >> CTS Base, 2.8 T, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 168 (Engine Cooling System) >> Repair Instructions >> Fan Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Fan
    GM1442452Courtesy of GENERAL MOTORS CORP.
  1. Remove the air cleaner intake duct. Refer to Air Cleaner Outlet Duct Replacement .
    2. IMPORTANT:
    1. The fan nut has right hand (REVERSE) threads.
    2. Do not completely remove the fan from the crank adapter shaft.
  2. Loosen the fan nut from the crank adapter shaft using J 41240-5A  . See Special Tools .
  3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  4. Disconnect the engine wiring harness from the engine frame and reposition aside.
  5. Continue to loosen the fan nut and disconnect the fan from the crank adapter shaft.
  6. Remove fan from vehicle.
scientia non olet · About LEMON Manuals