Capacities - Approximate Fluid

The following approximate capacities are given in English and metric conversions. See Fluid and Lubricant Recommendations for more information. All capacities are approximate. When adding, be sure to fill to the approximate level, as recommended in this manual. Recheck fluid level after filling.

Application	Specification
Application	Metric	English
Cooling System
2.8L HF V6 - RPO LP1	10.0 liters	10.6 quarts
3.6L HF V6 - RPO LY7	11.3 liters	12.0 quarts
6.0L V8 - RPO LS2	12.7 liters	13.4 quarts
Engine Oil With Filter
2.8L HF V6 - RPO LP1	5.7 liters	6.0 quarts
3.6L HF V6 - RPO LY7	5.7 liters	6.0 quarts
6.0L V8 - RPO LS2	5.2 liters	5.5 quarts
Engine Oil Without Filter
3.6L HF V6 - RPO LY7	5.20 liters	5.5 quarts
6.0L V8 - RPO LS2	4.7 liters	5.0 quarts
Fuel Tank	66.2 liters	17.5 gallons
Rear Differential Driveline/Axle - Locking/Limited Slip
Drain and Fill With Cover Removed	1.2 liters	1.27 quarts
Drain and Fill With Use of Drain Plug	1.0 liters	1.06 quarts
Rear Differential Driveline/Axle - Locking/Limited Slip Additive
Limited Slip Additive Drain and Fill With Cover Removed*	100 ml	3.38 oz
Limited Slip Additive Drain and Fill With Use of Drain Plug*	70 ml	2.37 oz
Transmission/Transaxle
Automatic Transmission/Transaxle - 5L40-E/5L50-E Complete Overhaul	8.5 liters	7.4 quarts
Automatic Transmission/Transaxle - 5L40-E/5L50-E Bottom Pan Removal	6.0 liters	9.0 quarts
Manual Transmission - Aisin AV6	1.8 liters	1.9 quarts
Manual Transmission - Tremec 6 Speed	3.5 liters	3.7 quarts
* The limited slip additive container capacity is greater than the amount needed. Only add the specified amount.