LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2007 >> CTS Base, 2.8 T, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 2.8L - Introduction (2 Of 2) >> Repair Instructions >> Engine Coolant Temperature Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of ECT Sensor
    GM1285193Courtesy of GENERAL MOTORS CORP.
  1. Install the ECT sensor.

    Tighten:  Tighten the sensor to 22 N.m (16 lb ft).

    2. Fig 2: View Of Coolant Temperature Sensor And Electrical Connector
    GM945424Courtesy of GENERAL MOTORS CORP.
  2. Connect the ECT sensor electrical connector.
  3. Install the shielding around the ECT sensor.
  4. Inspect and fill the cooling system as necessary. Refer to Draining and Filling Cooling System (GE 47716) or Draining and Filling Cooling System (LP1, LY7 Static Fill) or Draining and Filling Cooling System (LS2 Static Fill) .
scientia non olet · About LEMON Manuals