LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2007 >> CTS Base, 2.8 T, Automatic >> Repair and Diagnosis >> Electrical >> Starter >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Tray Replacement (LS2) >> Installation Procedure

Installation Procedure

    Fig 1: View Of Battery Tray
    GM1296149Courtesy of GENERAL MOTORS CORP.
  1. Install the battery tray into the vehicle.
    2. NOTE: Refer to Fastener Notice .
  2. Install the battery tray bolts.

    Tighten:  Tighten the battery tray bolts to 6 N.m (53 lb in).

    3. Fig 2: View Of Battery Retainer Bolt
    GM1296795Courtesy of GENERAL MOTORS CORP.
  3. Install the right side air inlet grille panel. Refer to Air Inlet Grille Panel Replacement (LHD) or Air Inlet Grille Panel Replacement (RHD) .
  4. Install the battery into the vehicle. Refer to Battery Replacement (LHD)  or Battery Replacement (RHD) .
scientia non olet · About LEMON Manuals