LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> XLR Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (HVAC Systems - Automatic) >> Repair Instructions >> HVAC Control Module Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating HVAC Control Module Screws
    GM756525Courtesy of GENERAL MOTORS CORP.
  1. Install the HVAC control module into the trim plate.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the HVAC control module screws (1).

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

    3. Fig 2: View Of HVAC Control Module Electrical Connector
    GM756502Courtesy of GENERAL MOTORS CORP.
  3. Connect the HVAC control module electrical connector.
  4. Connect the ash tray electrical connector.
    5. Fig 3: View Of HVAC Control Module Trim Plate
    GM700907Courtesy of GENERAL MOTORS CORP.
  5. Install the HVAC control module trim plate by pressing trim until tabs engage.
  6. Install the screw behind the ashtray.

    Tighten:  Tighten the screw to 2 N.m (18 lb in).

  7. Place the transmission in park and unapply the parking brake.
scientia non olet · About LEMON Manuals