LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> XLR Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Stationary Window System) >> Repair Instructions >> Windshield Side Reveal Molding Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. If the windshield reveal molding retainer clips are bent or damaged, replace the clips.
  2. Align the top end of the reveal molding to the end cap tongue inside the opening of the roof rail.
  3. Swing the reveal molding downward and align the molding with the clips.
    4. Fig 1: View Of Windshield Side Reveal Molding
    GM1276431Courtesy of GENERAL MOTORS CORP.
  4. Press down on the side reveal molding evenly in order to engage the molding to the windshield retainer clips.
  5. Remove the masking tape.
  6. Clean the tape residue from the windshield.
scientia non olet · About LEMON Manuals