LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> XLR Base >> Repair and Diagnosis >> Brakes >> Antilock Brake System With Traction Control System & Stability Control System >> Repair Instructions >> Vehicle Yaw Sensor with Vehicle Lateral Accelerometer Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Yaw Rate Sensor & Nuts
    GM1236994Courtesy of GENERAL MOTORS CORP.
  1. Position the yaw rate sensor in the vehicle (1).
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the yaw rate sensor bolts (2).

    Tighten:  Tighten the bolts to 7 N.m (62 lb in).

  3. Connect the yaw rate sensor electrical connector.
  4. Install the HVAC Control Module. Refer to HVAC Control Module Replacement in HVAC Systems - Automatic.
  5. Install the IP accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement in Instrument Panel, Gages and Console.
  6. Turn the ignition switch to the ON position, engine off.
  7. Perform the Diagnostic System Check - Vehicle in Vehicle DTC Information.
scientia non olet · About LEMON Manuals