LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> XLR Base >> Repair and Diagnosis >> Body & Frame >> Windows >> Stationary Window System >> Repair Instructions >> Inside Rearview Mirror Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Inside Rearview Mirror & Support
    GM1043562Courtesy of GENERAL MOTORS CORP.
  1. Perform the following steps to install the inside rearview mirror:
    2. NOTE: Do NOT pull rearward on the rearview mirror while installing or removing the mirror. Damage to the support or to the windshield may occur.
  2. Line up the back of the rearview mirror with the support on the windshield.
  3. Push firmly and turn counter-clockwise until an audible click is heard.
    4. Fig 2: View Of Inside Rearview Mirror & Electrical Connector
    GM1043529Courtesy of GENERAL MOTORS CORP.
  4. Install the electrical connector (1) to the back of the inside rearview mirror (2).
    5. Fig 3: View Of Outside Moisture Sensor & Cover
    GM1001762Courtesy of GENERAL MOTORS CORP.
  5. Remove the outside moisture sensor cover. Refer to Windshield Outside Moisture Sensor Replacement .

    Install the outside moisture sensor wiring harness cover, by snapping in it place, no tools are required

  6. Inspect the mirror for proper operation.
scientia non olet · About LEMON Manuals