LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> XLR Base >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Repair Instructions >> Cooling Fan Control Module Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Cooling Fan Control Module
    GM1500602Courtesy of GENERAL MOTORS CORP.
  1. Install the cooling fan control module to the vehicle.
    2. NOTE: Refer to Fastener Notice .
  2. Install the cooling fan control module retaining bolt.

    Tighten:  Tighten the bolt to 6 N.m (53 lb in).

    3. Fig 2: View Of Cooling Fan Control Module Electrical Connector
    GM1500599Courtesy of GENERAL MOTORS CORP.
  3. Connect the cooling fan control module electrical connector.
  4. Lower the vehicle.
  5. Refer to Control Module References for programming and setup information.
scientia non olet · About LEMON Manuals