LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> STS V >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Repair Instructions >> Shock Module Yoke Replacement (AWD) >> Removal Procedure

Removal Procedure

    Fig 1: View Of Shock-To-Yoke Retaining Bolt
    GM1209258Courtesy of GENERAL MOTORS CORP.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation .
  3. Remove the shock to yoke retaining nut.
  4. Remove the shock to yoke retaining bolt by pulling up slightly on the lower control arm to remove the pressure on the bolt.
    5. Fig 2: View Of Yoke-To-Lower Control Arm Retaining Nut
    GM874633Courtesy of GENERAL MOTORS CORP.
  5. Remove the yoke to lower control arm retaining nut.
    6. Fig 3: Disconnecting Shock Module Yoke From Lower Control Arm
    GM743091Courtesy of GENERAL MOTORS CORP.
  6. Using the J 24319-B  , separate the yoke from the lower control arm.
    7. Fig 4: View Of Yoke
    GM874641Courtesy of GENERAL MOTORS CORP.
  7. Remove the yoke from the vehicle.
scientia non olet · About LEMON Manuals