Installation Procedure

WARNING: This page is about a different car, the 2007 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying TV Antenna Amplifier

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: Ensure that the module coaxial cable connectors are pointing away from each other.

Reconnect the electrical connector.

NOTE: Refer to Fastener Notice .

Install the amplifier (1) to the sail panel using the fasteners (2).
Tighten: Tighten the fasteners to 9 N.m (80 lb in).
Connect the coaxial cable to the amplifier.
Reinstall the sail panel trim. Refer to Sail Panel Replacement .