Circuit/System Testing
WARNING: This page is about a different car, the 2007 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the harness connector at the TDM.
- Measure and record the voltage at the battery terminals. Ignition ON, measure the voltage between the accessory voltage circuit terminal 2 and the ground circuit terminal 3. Verify that the voltage readings do not differ more than 1 volt.
- If greater than 1 volt, test the accessory voltage circuit and the ground circuit for an open/high resistance. If the circuits test normal, replace the TDM.
- Refer to Charging System Test .