Power Liftgate Close Actuator Motor Replacement
WARNING: This page is about a different car, the 2007 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
Power Liftgate Motor Replacement
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove bodyside trim panel. Refer to Body Side Rear Trim Panel Replacement (w/o TB5) or Body Side Rear Trim Panel Replacement (w/TB5) . |
|
| 1 | Power Liftgate Motor Bolt (Qty: 5)
NOTE:
Refer to Fastener Notice
.
Tighten: 10 N.m (89 lb in) |
| 2 | Power Liftgate Motor Tip: Disconnect electrical connector. |