Circuit/System Testing
WARNING: This page is about a different car, the 2007 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the C1 harness connectors at the LGM.
- Ignition ON, verify that B+ is present at the liftgate ajar switch signal circuit terminal 5.
- If B+ is not present, test the signal circuit for a short to ground or an open/high resistance. If the circuit tests normal, replace the rear wiper motor.
- Ignition OFF, disconnect the harness connector at the rear wiper motor.
- Ignition ON, verify that voltage is not present at the liftgate ajar switch signal circuit terminal 5 at the LGM C1 harness connector.
- If voltage is present, test the signal circuit for a short to voltage.
- If all circuits test normal, replace the LGM.