LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> STS V >> Repair and Diagnosis >> External Pages >> Different car >> Section 124 (Power Door Lock System And Release Systems) >> Diagnostic Information and Procedures >> DTC B3130 >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different car, the 2007 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the unlock relay.
  2. Connect a test lamp between the B+ circuit terminal R35 and the control circuit terminal R31.
  3. Command the rear door locks to LOCK and UNLOCK with a scan tool. The test lamp should turn ON and OFF when changing between the commanded states.
    • If the test lamp is always ON, test the control circuit for a short to ground. If the circuit tests normal, replace the BCM.
    • If the test lamp is always OFF, test the control circuit for a short to voltage or an open/high resistance. If the circuit tests normal, replace the BCM.
  4. If the circuits test normal, test or replace the unlock relay.
scientia non olet · About LEMON Manuals