Installation Procedure

WARNING: This page is about a different car, the 2007 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Wiper Motor-To-Wiper Motor Module Retaining Screws

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .

Install the wiper motor onto the wiper motor module assembly with the screws (1).
Tighten: Tighten the screws to 10 N.m (89 lb in).

Fig 2: Installing Wiper Transmission To Wiper Motor Crank Arm

Courtesy of GENERAL MOTORS CORP.

Install the drive links onto the wiper motor crank arm using the J 39529 . See Special Tools .

Fig 3: Wiper Transmission View

Courtesy of GENERAL MOTORS CORP.

Install the wiper motor module assembly (1). Refer to Wiper Motor Module Replacement .
Operate the wipers and check for proper operation.