LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> STS V >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 4.4L - Introduction (2 Of 2) >> Repair Instructions >> Manifold Absolute Pressure Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Vacuum Line Fitting
    GM1614002Courtesy of GENERAL MOTORS CORP.
  1. Connect the vacuum line fitting (1) to the port on the bottom of the MAP sensor.
  2. Install the MAP sensor to the bracket.
    3. Fig 2: BARO, MAP & SCIAP Sensors
    GM1613998Courtesy of GENERAL MOTORS CORP.
  3. Connect the MAP sensor (3) electrical connector.
  4. Install the engine sight shield. Refer to Intake Manifold Sight Shield Replacement .
scientia non olet · About LEMON Manuals