LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> STS Base, 4.6 A, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (Power Steering System) >> Repair Instructions >> Power Steering Pulley Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using the J 25033-C  , install the power steering pump pulley to the power steering pump.
    Fig 1: View Of Power Steering Pump Pulley Installer
    GM643361Courtesy of GENERAL MOTORS CORP.
    2. Fig 2: Measuring Axial Tolerance Of Power Steering Pulley On Pump
    GM254752Courtesy of GENERAL MOTORS CORP.
  2. Ensure that the axial tolerance of the power steering pulley on the power steering pump is within 0.25 mm (0.010 in).
  3. Install the drive belt. Refer to Drive Belt Replacement - Power Steering and Air Conditioning in Engine Mechanical - 3.6L (LY7) or Drive Belt Replacement - Air Conditioning, Power Steering and Water Pump in Engine Mechanical - 4.6L (LH2).
  4. Install the air cleaner intake duct. Refer to Air Cleaner Intake Duct Replacement in Engine Controls - 3.6L (LY7) or Air Cleaner Outlet Duct Replacement in Engine Controls - 4.6L (LH2).
scientia non olet · About LEMON Manuals