LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> STS Base, 3.6 7, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Power Steering System) >> Repair Instructions >> Power Steering Pulley Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Power Steering Pump Pulley Installer
    GM643361Courtesy of GENERAL MOTORS CORP.
  1. Using J 25033-C  install the power steering pump pulley to the power steering pump.
    2. Fig 2: Measuring Axial Tolerance Of Power Steering Pulley On Pump
    GM254752Courtesy of GENERAL MOTORS CORP.
  2. Ensure that the axial tolerance of the power steering pulley on the power steering pump is within 0.25 mm (0.010 in).
  3. Install the drive belt. Refer to Drive Belt Replacement in Engine Mechanical -2.6L and 3.2L.
  4. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement in Engine Controls-2.6L and 3.2L.
scientia non olet · About LEMON Manuals