Installation Procedure

WARNING: This page is about a different car, the 2007 Cadillac XLR. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Inside Rearview Mirror & Support

Courtesy of GENERAL MOTORS CORP.

Perform the following steps to install the inside rearview mirror:

NOTE: Do NOT pull rearward on the rearview mirror while installing or removing the mirror. Damage to the support or to the windshield may occur.

Line up the back of the rearview mirror with the support on the windshield.
Push firmly and turn countclockwise until an audible click is heard.

Fig 2: View Of Inside Rearview Mirror & Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Install the electrical connector (1) to the back of the inside rearview mirror (2).

Fig 3: View Of Outside Moisture Sensor & Cover

Courtesy of GENERAL MOTORS CORP.

Remove the outside moisture sensor cover. Refer to Windshield Outside Moisture Sensor Replacement .
Install the outside moisture sensor wiring harness cover, by snapping in it place, no tools are required
Inspect the mirror for proper operation.