LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> STS Base, 3.6 7, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 3.6L - Introduction (2 Of 2) >> Repair Instructions >> Barometric Pressure Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Barometric Pressure Sensor And Electrical Connector
    GM945437Courtesy of GENERAL MOTORS CORP.
  1. Turn the ignition OFF.
  2. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement .
  3. Disconnect the barometric pressure (BARO) sensor electrical connector.
    4. Fig 2: View Of BARO Sensor
    GM1285192Courtesy of GENERAL MOTORS CORP.
  4. Remove the BARO sensor bolt.
  5. Remove the BARO sensor.
scientia non olet · About LEMON Manuals