LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> SRX 3.6 7, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Object Detection System >> Repair Instructions >> Object Alarm Module Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of RPA Module
    GM1210903Courtesy of GENERAL MOTORS CORP.
  1. Install the RPA module to the retainers.
    2. Fig 2: View Of RPA Module Electrical Connector
    GM1210898Courtesy of GENERAL MOTORS CORP.
  2. Connect the electrical connector (1).
  3. Install the rear body side trim. Refer to Trim Panel Replacement - Body Side Rear (w/o TB5) or Trim Panel Replacement - Body Side Rear (w/TB5) in Interior Trim.
scientia non olet · About LEMON Manuals