LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> Escalade EXT >> Repair and Diagnosis >> Steering >> Steering Linkage (Non-Rack & Pinion) >> Repair Instructions >> Steering Damper Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Steering Damper Components
    GM340952Courtesy of GENERAL MOTORS CORP.
  1. Raise the vehicle. Support the vehicle with safety stands. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the engine protection shield, if equipped. Refer to Engine Protection Shield Replacement in Frame and Underbody.
    3. IMPORTANT: Do not reuse the nut.
  3. Remove the steering damper (2) ball stud nut (1).
    4. Fig 2: Removing the Steering Damper Ball Stud From The Relay Rod
    GM397364Courtesy of GENERAL MOTORS CORP.
  4. Remove the steering damper ball stud from the relay rod using the J 24319-B  .
    5. Fig 3: Steering Damper Components
    GM340952Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Do not reuse the nut.
  5. Remove the steering damper mounting bolt (5) and the nut (6).
  6. Remove the steering damper (4) from the vehicle.
  7. Inspect the following parts:
    • The steering damper for leaks and damage
    • The mounting bolts and the nuts for damage or corrosion
scientia non olet · About LEMON Manuals