LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 688 (Power Take-Off System) >> Repair Instructions >> Power Take-Off (PTO) Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 GMC Sierra and 2006 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the I/P cluster bezel. Refer to Bezel Replacement - Instrument Panel (I/P) Cluster in Instrument Panel, Gages, and Console.
  2. Pull out the switch housing from the I/P.
  3. Disconnect the wire connector to the PTO switch.
  4. Remove the PTO switch from the switch housing.
    Fig 1: Removing PTO Switch From I/P Switch Housing
    GM884837Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals