LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1704 (Fixed And MOVEABLE Windows System) >> Repair Instructions >> Rear Window Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a stationary window into the opening. Refer to Adhesive Installation of Stationary Windows (Rear Window)  or Adhesive Installation of Stationary Windows (Windshield) .
  2. Install the rear sliding window regulator, if equipped. Refer to Rear Sliding Window Regulator Replacement .
  3. Install the window lower garnish molding. Refer to Rear Window Lower Garnish Molding Replacement (Ext Cab/Crew Cab w/A48) or Rear Window Lower Garnish Molding Replacement (Ext Cab/Crew Cab w/o A48) or Rear Window Lower Garnish Molding Replacement (Regular Cab) .
  4. Install both rear seat headrests (extended cab). Refer to Head Restraint Replacement .
  5. Remove the rear seat (extended cab) only. Refer to Rear Seat Replacement (Crew Cab with A68) or Rear Seat Replacement (Extended Cab with AM7) or Rear Seat Replacement (Extended Cab with A68) .
  6. Remove the rear sliding window regulator motor bolt, if equipped. Refer to Rear Sliding Window Regulator Replacement .
  7. Remove the double layer of masking tape around the perimeter of the painted surfaces and interior trim.
scientia non olet · About LEMON Manuals