Installation Procedure
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Position the window and tape into position.
- Install the bolts to the hinges.
Tighten: Tighten the bolts to 10 N.m (89 lb in).
- Install the window latch.
- Remove the tape and inspect the window.
- Install the side access door trim panel. Refer to Rear Side Access Door Trim Panel Replacement .
CAUTION:
Refer to Fastener Caution
.