LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1291 (Cruise Control System) >> Diagnostic Information and Procedures >> DTC P0571 >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON, verify that the Stoplamp Pedal Switch parameter in the ECM reads Applied while depressing the brake pedal.
    • If the parameter reads Released, test the brake applied signal circuit for a short to ground or an open/high resistance. If the circuit tests normal, replace the ECM.
  2. Ignition ON, release the brake pedal, verify that the Stoplamp Pedal Switch parameter reads Released.
    • If the parameter reads Applied, test the brake applied signal circuit for a short to voltage. If the circuit tests normal, replace the BCM.
  3. If all circuits test normal, replace the ECM.
scientia non olet · About LEMON Manuals