LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> Escalade EXT >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Object Detection System >> Repair Instructions >> Object Alarm Module Replacement (Yukon XL and Escalade ESV) >> Removal Procedure

Removal Procedure

    Fig 1: Removing Object Alarm Module (Yukon XL & Escalade ESV)
    GM1363961Courtesy of GENERAL MOTORS CORP.
  1. Remove the left rear quarter trim panel. Refer to Trim Panel Replacement - Rear Quarter - Left (Suburban) or Trim Panel Replacement - Rear Quarter - Left (Utility) in Interior Trim.
  2. Disconnect the electrical connector from the module.
  3. Remove the module fasteners (1).
  4. Remove the module (2).
scientia non olet · About LEMON Manuals