LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> DTS 4.6 9 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 4.6L - Introduction (2 Of 2) >> Repair Instructions >> Camshaft Position (CMP) Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: CKP Sensor Wiring Harness
    GM1672927Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the crankshaft position (CKP) sensor wiring harness electrical connector (1) from the camshaft position (CMP) sensor.
    2. Fig 2: CMP Sensor
    GM1672561Courtesy of GENERAL MOTORS CORP.
  2. Remove the CMP sensor bolt.
  3. Remove the CMP sensor.
scientia non olet · About LEMON Manuals