LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> DTS 4.6 9 >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Engine Ground Cable Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Generator
    GM1669928Courtesy of GENERAL MOTORS CORP.
  1. Position the engine ground cable to the generator.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the rear generator bolt.

    Tighten:  Tighten the bolt to 50 N.m (37 lb ft).

  4. Fig 2: Engine Ground Cable
    GM1664485Courtesy of GENERAL MOTORS CORP.
  5. Install the bolt securing the engine ground cable to the right side body frame rail.

    Tighten:  Tighten the bolt to 25 N.m (18 lb ft).

  6. Install the front compartment sight shield. Refer to Front Compartment Sight Shields Replacement .