LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> DTS 4.6 9 >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Battery Hold Down
    GM1669926Courtesy of GENERAL MOTORS CORP.
  1. Install the battery.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the battery hold down and bolt.

    Tighten:  Tighten the bolt to 17 N.m (13 lb ft).

    3. Fig 2: Battery Vent Tube
    GM1669924Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Ensure that the vent tube is properly routed through the floor pan grommet.
  3. Install the battery vent tube to the battery.
    4. Fig 3: Positive Battery Cable
    GM1669909Courtesy of GENERAL MOTORS CORP.
  4. Position the positive battery cable (2) to the battery.
  5. Tighten the positive battery cable bolt (1).

    Tighten:  Tighten the bolt to 17 N.m (13 lb ft).

  6. Snap the positive battery cable cover (3) closed.
  7. Connect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .
scientia non olet · About LEMON Manuals