LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> CTS Base, 3.6 7, Standard >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Shift Lock Control System >> Repair Instructions >> Automatic Transmission Shift Lock Actuator Replacement >> Removal Procedure

Removal Procedure

  1. Remove the shift control boot. Refer to Floor Shift Control Boot Replacement .
  2. Remove the center console assembly. Refer to Console Replacement - Front Floor in Instrument Panel, Gages and Console.
    3. Fig 1: Disconnecting Wiring Harness Connector
    GM834512Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the wiring harness connector (1) from the shift lock control pigtail connector (2).
  4. Slide the pigtail connector (2) off of the retainer (3).
  5. Remove the pigtail harness from the wire retainer (4).
    6. Fig 2: Removing Three Shift Lock Actuator Attaching Screws
    GM801326Courtesy of GENERAL MOTORS CORP.
  6. Remove the three shift lock actuator attaching screws (1).
  7. Remove the shift lock actuator (2) from the shift control assembly.
scientia non olet · About LEMON Manuals