Removal Procedure
- Run the window to the full closed position.
- Remove the door trim panel. Refer to Trim Panel Replacement - Side Front Door .
- Remove the water deflector. Refer to Water Deflector Replacement - Front Door .
- Remove the window inner belt sealing strip. Refer to Sealing Strip Replacement - Front Door Window Belt Inner .
- Tape the window in the closed position.
- Loosen the window clamp nuts 4 revolutions.
- Connect the door trim panel electrical connector.
- Using the power window switch, lower the window regulator to separate the window from the clamps.
- Remove the tape.
- Remove the window by tilting the window forward then pulling the window up and out of the door.
CAUTION:
Refer to Glass and Sheet Metal Handling Caution in Cautions and Notices.
CAUTION:
Refer to Express Window Down Caution in Cautions and Notices.